Rainwater Filter for installation in the lower section of the downpipe. It is easy to monitor due to its installation position in the downpipe. No need to lift heavy lids or to climb down into storage tank, as required when filters are installed underground. The Rainus ejects dirt while allowing the cleaned rainwater to continue through the downpipe.
The 3P Rainus is also ideal for retro-fitting to systems which currently do not have a filter. Simple installation and maintenance depending on contamination. To clean, slide the filter unit out, and brush off any dirt.
Connection capacity for roof areas up to 90 m²
Suitable for installation on 65mm square and 68 mm round diameter down pipes.
The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.
|How it works1. The rainwater flow is attenuated by baffles in the upper filter housing.
2. Rainwater is then calmed in a small sump.
3. Water then weirs over the sump lip, and is distributed evenly across the primary cascade, the first cleaning step.
4. The primary cascade filters out any large or coarse particles, such as leaves and moss.
5. Behind the primary cascade is a fine secondary filter.
6. Both fine and coarse particles are ejected from the front of the filter.
7. Cleaned rainwater flows through the downpipe to a storage tank or soakaway.
Suitable for installation on 65mm square or 68mm round down pipes. Please contact uswith any questions regarding fitting the Rainus or other filters to your down pipe.The filter is approx 505 mm high and 170 mm wide. It needs very little space behind it and is just 22 cm deep.
Housing material: ABS
Mesh size 0.7 x 1.7 mm
Weight: : 2.0 kg
The 3P Rainus is ideal for retro-fitting to existing installations where no other filter can be installed due to restricted space or levels.
The 3P Rainus is also a cheap alternative in case of a new installation of a rainwater tank, as the roof area is not bigger than 90 m².
The 3P Rainus was designed for soakaway and attenuation systems which have to be protected from blockage.
The 3P Rainus performs best under normal rainfall intensities, where it achieves its optimal efficiency. In deluge conditions, some water can also be ejected, particularly where there is a heavy leaf loading.
We recommend installation of the 3P Rainus above paved ground upon which debris and excess water can drain away from the building.
|The Rainus with UK adapters fits UK sized downpipes of 100mm, 80mm and 68 mm round downpipes and 68mm square downpipes.|
| Rainus Down pipe Filter c/w UK adaptersArt-no. 2000700UK - GreyArt-no. 2000790UK - Brown
Art-no 2000715 - Spare Filter Insert