3P Rainwater tank system above ground a practical alternative to underground rainwater systems……
To view the 3P Wall Tanks information please visit the Wall Tank page
A durable, premium quality garden system for rainwater storage and pumping.
The Rain-Tank System is a practical alternative to underground rainwater systems. Included is a sight gauge, and a self-priming jet pump capable of pumping water to a height of 41 metres. Each tank is 800 litres (175 gallons). Its attractive modern design has a space saving small footprint.
By clever design each tank is easily linked to the next using a sturdy 25mm hose between metal threads. Tanks are available in 4 finishes: British Racing Green, Granite,- Sand or Matt Black. This allows you to select the best colour to blend in at your site. The system features a highly efficient rainwater filter-diverter which is installed on the down-pipe, cleaning the rainwater before diverting it sideways into the tank, while leaves and debris continue down to the drain. When the Rain-Tanks are full the Filter-Collector automatically sends excess rainwater to the drain as usual. The Filter-Collector’s unique removable filter cartridge can be taken out in seconds for cleaning.
Dimensions: 800mm x 600mm x1790mm
Material: PE (Polyethylene)
Sight Gauge and Hi-Flow tap (3/4“) for faster filling of watering cans included
3P Filter-Collector for optimum filtered rainwater quality
Fully waterproof (and submersible) pump delivers up to 3100 litres (681 gallons)/hour
Easy-fit pump connection point with shut-off valve
|System Size Options
Any multiple of 800 litres (175 gallons) is available.
Typical system sizes;(1 Tank) – System 800 Art no. – RTS800
Available in Black (BK), Grey (GY), Sand (SS) and Green (GN)
3P Technik Rain Tank Systems enable mains style
The 3P Rain-Tank System enjoys the pressure and convenience of mains water, thanks to it’s compact and powerful jet pump.The pump’s unique advantage is it’s integrated electronic flow control. Connect it to a hose or tap and it will run when you open the tap and automatically shut off when you close it, so there’s no need to run and switch the pump off. The pump is capable of supplying water at over 4 bar of pressure (59psi) or to a height of 41 metres (134ft). The flow rate through a 1/2 inch hose pipe is similar to mains water. The pump outlet connection will also take a 3/4 inch or 1 inch hose.
The 3P Rain-Tank System has a compact, sturdy metal valve and a simple, reliable brass connector enabling you to shut off the outlet from the Rain Tank and disconnect the pump for storage.
|Accessories Kit 1 – WTKIT
All Wall Tanks comes with a Wall Tank Kit this includes the following: Wall Fixing Bracket, Plastic High Flow 3/4″ BSP Tap, Holesaw set with Rubber Grommets.
Use of the Wall Fixing Bracket is optional and depends on site conditions including exposure and the nature of the joining wall. If in doubt consult a qualified professional.
Article No see above under system size options